Provides one-step treatment that destroys old rust and prevents new rust. Just brush or spray on. Within minutes, rust is replaced by a durable black polymer coating that may be painted. Excellent protective primer. Specially formulated to be used with body filler and fiberglass. Can be used when temperature is between 50°F and 90°F (10°C and 32°C) and on surfaces which do not exceed 200°F (93°C). Aerosol – Level 2

Suggested Applications: Destroys rust on trailers, storage tanks, pipes, valves, bulkheads, decks, hatch covers (topcoat with appropriate marine equipment, plows, tractor)

DIRECTIONS:

The original quality formula, a hard setting, economical sealant. Seals all common gasketing materials in low temperature and low pressure applications. Temperature range -65°F to 350°F (-54°C to 177°C); resists diesel fuels and most shop fluids.

Suggested Applications: Hose connections, paper and cardboard gaskets

DIRECTIONS:

For leak proof gaskets and threaded assemblies, apply a thin, even coat to both parts. Allow to dry, then assemble. Resists water, steam, petroleum products, and antifreeze.

Removes the toughest grease, tar, grime, ink, paints, sealants, adhesives and other difficult soils. Each pre-moistened wipe has a textured surface on one side that is ideal for cleaning heavy duty soils from hands, tools and work areas. The wipes also have a smooth side for general purpose cleaning.

Permatex® Body Shop® Heavy Duty Headliner & Carpet Adhesive
High-strength spray adhesive designed for repairing interior parts which have become detached or loosened. Resistant to extreme weather conditions. Water-resistant. Dries clear for neat appearance. High temperature formula maintains high strength at temperatures up to 170°F (77°C). VOC compliant. Level 3

Suggested Applications: Excels at attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board

DIRECTIONS:

Product may attack some plastics or painted surfaces. Masking tape can be used to protect these areas, but should be removed immediately after application.

• Make sure all surfaces are clean, dry and free from any contaminates.
• Shake can before use.
• Turn nozzle to select spray pattern width; low, medium or high.
• Hold can 6–8 inches from work surface and apply 2–3 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds,apply adhesive to both surfaces.
• Allow adhesive to dry for 5 minutes, or until tacky, before setting.
• Press surfaces together with uniform pressure, eliminating air pockets. Bonds should be made within 30 minutes of application. Full cure is achieved in 24 hours at 70°F(21°C).
• To prepare can for next use, invert, and dispense until spray is free of adhesive.

Seals and coats battery terminals eliminating the formation of acid salt corrosion typically found when terminals are untreated. Prevents terminal corrosion and battery drain. Increases battery life and improves electrical flow. Spray on batteries, battery terminals, and cables, in or out of storage. Aerosol – Level 3*

Suggested Applications: Marine batteries

DIRECTIONS:

First, clean parts to be treated with SA-8 (80369) Permatex^® Battery Cleaner. Shake Battery Protector well. Hold can 10 to 12 inches from the treated surface,and apply two thin coats.

An all-purpose, pressure sensitive, spray adhesive that allows both permanent and repositionable bonding. Won’t bleed through leaving surfaces unstained, dries clear. Unique formula resists water and humidity. Will not shrink. Adheres to porous and nonporous materials. VOC compliant. Level 3.

Suggested Applications: Excels at attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board

DIRECTIONS:

Surfaces should be clean, dry and free of oil or grease. Shake can for one minute. Can temperature should be at least 60°F (15°C). For best results, hold can 8-12 inches from surface. For headliners, use Permatex^® Body Shop Heavy Duty Headliner & Carpet Adhesive, Item# 27828.