Seaview – The Marine Place

Threaded Insert For Spreader Kit 1-1/4″

admin — Sun, 24 May 2020 11:27:42 +0000

Stainless steel 1-14 threaded insert for Seaview Spreader Kits. This insert replaces the plastic threaded insert that comes with Seaview Spreader Kits. By using this stainless steel threaded insert you can use 4′ or taller fiberglass antennas on all Seaview Spreader Kits

Spreader Kit For Radar / Satdome

admin — Sun, 24 May 2020 11:24:31 +0000

This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion.

SPREADER KIT CONFIGURATIONS

With this spreader kit there are two ways to configure it, one for a closed dome radar configuration and one for a satdome configuration. The above image illustrates what is included out of the box, including the extension posts. When you are using a closed dome radar with a spreader kit you want to raise your GPS units above the closed dome radar to avoid interference. If you are using a satdome you don’t need to use these extension posts with GPS units. You see satdome radio waves travel up to the sky to the satellites, while the GPS waves will travel horizontally. Therefore you do not want these raised above your satellite dome.

HOW TO GET THE RIGHT SPREADER KIT FOR YOU

There are two different spreader kits available from Seaview. The only difference between the two is the size of the midsection that mounts to whichever Seaview mount you have. The smaller of the two is the SP1MOD. The SP1MOD will only fit on Seaview mounts that have a part number ending in “M1”, for instance a PMA57M1. Mounts that end in “M2” for example a PMADM2M2 would use a SP2MOD spreader kit.

Multi Cable Gland With Cover In High Pol

admin — Sun, 24 May 2020 11:20:48 +0000

The Seaview Cable Glands / Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black powder coated 316 stainless steel. Seaview cable gland options for 17mm to 31mm (0.67” to 1.25”) connectors, making it ideal for almost every installation.

Multi Cable Gland With Cover In Black 2-17M

admin — Sun, 24 May 2020 11:17:48 +0000

We have streamlined our manufacturing process, and have changed our black Cable Gland option to a black powder coated stainless steel housing as opposed to a black anodized aluminum housing. The remainder of our black anodized aluminum Cable Gland stock is available here for a clearance price.

Modular Plate For Mounts Ending In M1

admin — Sun, 24 May 2020 11:15:54 +0000

Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the “swiss cheese” look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

Modular Plate For Mount End In M1 Or M2

admin — Sun, 24 May 2020 11:12:56 +0000

Seaview ADAS2 Modular Top Plate for Large Satdomes

Designed for 24″ KVH, Intellian and Raymarine*

Material: Anodized Aluminum, Encased in UV Stable White ABS Plastic

PreDrilled Aluminum Interior Plate, Dimpled Plastic Surface Matches Templates

Modular Plate For Mount End In M1

admin — Sun, 24 May 2020 11:11:28 +0000

Seaview ADAS1 Modular Top Plate for Small Satdomes

Designed for 24″ KVH, Intellian, Raymarine and SeaKing*

Material: Anodized Aluminum, Encased in UV Stable White ABS Plastic

PreDrilled Aluminum Interior Plate, Dimpled Plastic Surface Matches Templates

Light Bar For Flir / Searchlight 1-1/4″

admin — Sun, 24 May 2020 11:09:23 +0000

Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25″ in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What’s also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.

Grey Gf + Abs Multi-Gland W/ Uv Stable 2-17Mm

admin — Sun, 24 May 2020 11:05:22 +0000

Grey Gf + Abs Cable Gland W/ Uv Stable 2-15Mm

admin — Sun, 24 May 2020 11:04:31 +0000