Mastervolt Chargers – The Marine Place

Orion-Tr-24/12-9A(110W) Isolated Dc-Dc Converter Retail

admin — Fri, 15 May 2020 19:15:02 +0000

Remote on-off
The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.

IP43 protection
When installed with the screw terminals oriented downwards.

Screw terminals
No special tools needed for installation.

Input fuse
On 12V and 24V input models only.

Orion-Tr-24/12-20A(240W) Isolated Dc-Dc Converter

admin — Fri, 15 May 2020 19:11:31 +0000

Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.

IP43 protection
When installed with the screw terminals oriented downwards.

Screw terminals
No special tools needed for installation.

Input fuse
On 12V and 24V input models only.

Orion-Tr-24/12-15(180W) Dc-Dc Converter Retail

admin — Fri, 15 May 2020 19:07:42 +0000

High efficiency

Using synchronous rectification, full load efficiency exceeds 95%.

IP43 protection

When installed with the screw terminals oriented downwards.

Screw terminals

No special tools needed for installation.

Orion Ip67 24/12-20A(240W)

admin — Fri, 15 May 2020 19:01:52 +0000

Completely encapsulated:

waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Extra-long input and output cables

Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.

Wide input voltage range

With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.

Protected against overheating

It can be used in a hot environment such as a machine room.

Orion Ip67 24/12-10A(120W)

admin — Fri, 15 May 2020 18:59:28 +0000

Victron Energy Orion DC/DC Converter Non Isolated IP67 – 24/12-10 (120w) – ORI241210060

Victron Energy Orion DC-DC Converter – 24v input – 12v output – 10A – fully encapsulated (IP67)

Completely encapsulated: waterproof, shockproof and ignition protected – Water, oil or dirt will not damage the Orion IP67 DC-DC converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Extra-long input and output cables – Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.

Wide input voltage range – With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.

Protected against overheating – Can be used in a hot environment such as a machine room.

Features

Input voltage range: 15-40 VDC
Output voltage: 12 VDC +/- 3%
Efficiency: 93%
Continuous output current: 10 A
IP67 Protection
DC Connection: 2 Input & 2 Output cables, 1.8m

Orion 24/12-40A Dc-Dc Converter (Uout=13,12W)

admin — Fri, 15 May 2020 18:55:23 +0000

Remote on-off connector

The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).

All models with adjustable output can also be used as a battery charger

For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models with adjustable output can be paralleled to increase output current

Up to five units can be connected in parallel.

Easy to install

Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).

Low power models: please see Orion-Tr series

Orion 12/24-10 Dc-Dc Converter Ip20

admin — Fri, 15 May 2020 18:51:15 +0000

Remote on-off connector

The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).

All models with adjustable output can also be used as a battery charger

For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models with adjustable output can be paralleled to increase output current

Up to five units can be connected in parallel.

Easy to install

Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).

Low power models: please see Orion-Tr series

Battery Mate 2503 IG

admin — Sun, 16 Feb 2020 07:45:12 +0000

Onboard systems usually consist of two or more batteries that function independently when powering the 12 or 24 V consumers. These batteries require independent charging with reliable battery isolators or battery combiners.

Mastervolt offers several intelligent solutions:

Battery isolators that divide your charge current with a minimum energy loss.

The Charge Mate for connecting and/or disconnecting two batteries.

Battery Watch for monitoring the condition of your batteries (also usable as main switch).

While BI battery isolators are conventional diode splitters, the Battery Mate’s technology is electronic and includes mosfets (transistors). Its components compensate for the voltage drop and ensure that charging continues at the right voltage level, even with several battery banks.

The Battery Mate is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than conventional battery isolators. This ensures fast and complete charging of your batteries without having to make additional adjustments to the alternator.

Charging two or three batteries at high capacity
The Battery Mate is most suitable for charging multiple batteries, possibly with various brands of alternators, even if their charge voltage cannot be adjusted. It can charge two or three batteries with a very high yield and without voltage loss.

Models 1602/1603 are suitable for alternators with a maximum charge current of 160 amp, the Battery Mate 2503 is ideal for alternators with a maximum charge current of 250 amp.

Clear monitoring
Safety guaranteed: The Battery Mate LED display indicates whether the power input is active.

Robust and durable
Completely corrosion-proof material with aluminium heat sinks, the electronic components are encased in synthetic materials.

Fast installation
The synthetic end plates feature connection lugs, the solid bolt connections with nuts and locking rings ensure easy installation.

Battery Mate 1603 IG

admin — Sun, 16 Feb 2020 07:41:56 +0000

Mastervolt offers several intelligent solutions:

Battery isolators that divide your charge current with a minimum energy loss.

The Charge Mate for connecting and/or disconnecting two batteries.

Battery Watch for monitoring the condition of your batteries (also usable as main switch).

Models 1602/1603 are suitable for alternators with a maximum charge current of 160 amp, the Battery Mate 2503 is ideal for alternators with a maximum charge current of 250 amp.

Clear monitoring
Safety guaranteed: The Battery Mate LED display indicates whether the power input is active.

Robust and durable
Completely corrosion-proof material with aluminium heat sinks, the electronic components are encased in synthetic materials.

Fast installation
The synthetic end plates feature connection lugs, the solid bolt connections with nuts and locking rings ensure easy installation.

Battery Mate 1602 IG

admin — Sun, 16 Feb 2020 07:37:36 +0000

Mastervolt offers several intelligent solutions:

Battery isolators that divide your charge current with a minimum energy loss.

The Charge Mate for connecting and/or disconnecting two batteries.

Battery Watch for monitoring the condition of your batteries (also usable as main switch).

Models 1602/1603 are suitable for alternators with a maximum charge current of 160 amp, the Battery Mate 2503 is ideal for alternators with a maximum charge current of 250 amp.

Clear monitoring
Safety guaranteed: The Battery Mate LED display indicates whether the power input is active.

Robust and durable
Completely corrosion-proof material with aluminium heat sinks, the electronic components are encased in synthetic materials.

Fast installation
The synthetic end plates feature connection lugs, the solid bolt connections with nuts and locking rings ensure easy installation.