Battery Chargers – The Marine Place https://www.themarineplace.qa Choose the best Sun, 18 Jun 2023 09:43:51 +0000 en hourly 1 https://wordpress.org/?v=5.5.15 https://www.themarineplace.qa/wp-content/uploads/2020/01/cropped-logo-e1579592010611-1-32x32.png Battery Chargers – The Marine Place https://www.themarineplace.qa 32 32 Blue Smart Ip22 Charger 24/12(1) 230V Uk https://www.themarineplace.qa/product/blue-smart-ip22-charger-24-121-230v-uk/?utm_source=rss&utm_medium=rss&utm_campaign=blue-smart-ip22-charger-24-121-230v-uk https://www.themarineplace.qa/product/blue-smart-ip22-charger-24-121-230v-uk/#respond Fri, 15 May 2020 18:48:26 +0000 https://www.themarineplace.qa/?post_type=product&p=12175

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
]]> https://www.themarineplace.qa/product/blue-smart-ip22-charger-24-121-230v-uk/feed/ 0 Blue Smart Ip22 Charger 12/20(1) 230V Uk https://www.themarineplace.qa/product/blue-smart-ip22-charger-12-201-230v-uk/?utm_source=rss&utm_medium=rss&utm_campaign=blue-smart-ip22-charger-12-201-230v-uk https://www.themarineplace.qa/product/blue-smart-ip22-charger-12-201-230v-uk/#respond Fri, 15 May 2020 18:45:50 +0000 https://www.themarineplace.qa/?post_type=product&p=12171

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Features
Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
]]> https://www.themarineplace.qa/product/blue-smart-ip22-charger-12-201-230v-uk/feed/ 0 Automative Ip65 Charger 6V/12V-1,1A https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a-copy/?utm_source=rss&utm_medium=rss&utm_campaign=automative-ip65-charger-12v-14a-12v-1a-copy https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a-copy/#respond Fri, 15 May 2020 18:38:52 +0000 https://www.themarineplace.qa/?post_type=product&p=12166 DC connector

Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

Charges 6V and 12V batteries

The charger will automatically adapt its charge algorithm to 6V or 12V batteries

Protected against overheating and reverse polarity connection

The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.

EightLED’s for status and mode indication

When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 2V in case of a 6V battery and 7V in case of a 12V battery), charging is initiated by pressing the MODE button. The state of charge of the battery is indicated by 4 LED’s:

  1. Red LED marked 25% flashing: state of charge less than 25%.
  2. Red LED marked 25% on, and red LED marked 50% flashing: state of charge less than 50%.
  3. Red LED’s on, and yellow LED marked 75% flashing: state of charge less than 75%.
  4. Red and yellow LED’s on and green LED marked 100% flashing: battery nearly charged.
  5. All charge level LED’s solid on: battery fully charged. Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).

Until the battery is fully charged, the red LED CHARGE will be on.

After completion of the charge process, the red LED FULL will be on.

In case of reverse polarity connection, the red LED ! will be on

If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.

The charger always starts in STANDBY mode when connected to the AC supply.

]]> https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a-copy/feed/ 0 Automative Ip65 Charger 12V/14A-12V/1A https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a/?utm_source=rss&utm_medium=rss&utm_campaign=automative-ip65-charger-12v-14a-12v-1a https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a/#respond Fri, 15 May 2020 18:28:24 +0000 https://www.themarineplace.qa/?post_type=product&p=12160 DC connector

Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

Less maintenance and aging when the battery is not in use: the Storage Mode

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Protected against overheating and reverse polarity connection

The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection. Five LED’s for status and mode indication When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button:

  1. Current limited t0 0,8A and 14,4V absorption voltage. The red LED <14Ah will be on.
  2. Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
  3. Current 4A and 14,7V absorption voltage. The red LED COLD will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).

Until the battery is fully charged, the red LED CHARGE will be on.

After completion of the charge process, the red LED FULL will be on.

In case of reverse polarity connection, the red LED ! will be on

If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.

The charger always starts in STANDBY mode when connected to the AC supply.

]]> https://www.themarineplace.qa/product/automative-ip65-charger-12v-14a-12v-1a/feed/ 0