Features

Features

 
Directions
If wood is grey and/or dirty, first treat with Star brite Teak Cleaner and Star brite Teak Brightener. Shake Tropical Teak Oil/Sealer well before applying. Use a mixing stick to get any of the solids at the bottom of the container into solution. Teak should be completely dry when applying Tropical Teak Oil/Sealer. Apply product with a foam brush using short strokes in the direction of the wood grain. It is important to use even brush strokes to obtain a uniform finish. Always stop application at a natural break point such as a seam. Look over the treated areas to make sure that there are no brush marks or uneven spots. Uneven or poor application can be corrected by rubbing with a clean dry towel in direction of grain before sealer dries. Any spills or drips should be cleaned immediately with mineral spirits on a clean rag. One coat is all that is necessary to obtain the desired colour and wood grain patina.

Star brite® Teak Sealer lasts longer than traditional sealers. Its UV-inhibitors prevent weathering, fading, and provide more overall protection. Advanced polymers help repel moisture and preserve color on teak and other fine woods.

Features

Directions

PREPARE SURFACE:
Always start with a clean surface. For graying or dirty wood, clean thoroughly with Star brite Teak Cleaner. If sanding teak, you must clean the surface before sealing, making sure to remove any loose wax or pitch. Follow with Star brite Teak Brightener—it not only enhances the grain and patina of the teak, but also opens the pores of the wood, allowing Teak Sealer to penetrate more evenly and provides maximum adhesion and performance. If any stains, black streaks, or dirt marks still remain, use Star brite Teak Scrub while teak is wet to remove all discolorations. Allow teak to dry completely before applying sealer.

Mix sealer by shaking or stirring. Once open, use a mixing stick to stir any solids on the bottom of the container into solution. Apply product with a foam brush in the direction of the wood grain, using short, even brush strokes to obtain a uniform finish. Continue application across entire surface, ending strokes at natural break points, such as a seams. Once complete, apply a second coat to ensure an even, clear finish.

TIPS & TRICKS:
Brush marks or uneven spots? Easily corrected by rubbing with a clean, dry towel in the direction of the wood grain before sealer dries. Clean any spills or drips immediately with mineral spirits and a clean rag. Sunlight/UV-exposure will speed drying time.

NEXT STEPS & MAINTENANCE:
Clean wear and tear from heavy traffic areas with Star brite Boat Wash or diluted Star brite Teak Cleaner, and allow to dry. Touch up scuffed or scratched spots by applying Teak Sealer. Blend into surrounding area with a clean, dry cloth. Touched-up area will blend in with other treated teak upon drying. Star brite Teak Sealer will slowly fade as it ages, instead of turning black. At that time, follow these direction completely to refinish surface. If for any reason sealer needs to be removed safely, quickly and efficiently, use Star brite Gel Formula Teak Cleaner/Restorer.

Features

• Extra long lasting protection for teak.
• Gives teak a natural warm golden color.
• Easy to use, fast drying.
• Contains ultraviolet absorbers to resist weathering.
• Lasts 4 to 6 times longer than standard teak oils.
• Advanced tung oil polymer formula.
• Sealer/Preserver/Finish for Marine Teak
• Also ideal for use on teak furniture and other fine woods
• Ultra-refined oil, polymers and UV inhibitors provide long-lasting protection and beauty
• Enhances the natural wood grain and color of teak
• Brings out the natural beauty of all fine woods
• Delivers a professional-grade finish, even by first-time users
• Penetrates deep into teak and contains UV inhibitors to protect against Sun’s drying effects
• Easy to apply; Dries quickly

Directions
If wood is dirty and/or weathered, first treat it with Star brite Premium Teak Cleaner and Star brite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Star brite Premium Golden Teak Oil at the first sign of weathering.

Features

 
Directions
If wood is dirty and/or weathered, first treat it with Star brite Premium Teak Cleaner and Star brite Premium Teak Brightener. Apply to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil. Apply a second coat only if wood is extremely porous. Reapply Star brite Premium Golden Teak Oil at the first sign of weathering.

Features

 
Directions
If wood is dirty and/or stained, first treat with Star brite Premium Teak Cleaner. Shake well.

Apply with sponge, cloth or brush in direction of wood grain. Allow to remain on surface for 5 minutes then rinse thoroughly with fresh water. For best results, use when temperature is over 50°F. Use of rubber gloves is recommended. Immediately rinse off spills and drips from surfaces not being treated. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer

Features

 
Directions
Badly weathered (grey or black) teak: Apply Star brite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Star brite Medium Scrub Pad. Allow Star brite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Star brite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Star brite Premium Teak Cleaner and spread with brush or Star brite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Star brite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer. NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.

Features

 
Directions
Badly weathered (grey or black) teak: Apply Star brite Premium Teak Cleaner directly to dry wood. Spread cleaner with stiff bristle cleaning brush or a Star brite Medium Scrub Pad. Allow Star brite Premium Teak Cleaner to remain on surface for approximately two to three minutes, then scrub in the direction of wood grain to ensure deep cleaning. Rinse thoroughly with fresh water. For stained areas, use Star brite Magic Scrub to remove even the most stubborn discoloration. Lightly stained teak: Wet wood with fresh water. Apply Star brite Premium Teak Cleaner and spread with brush or Star brite Medium Scrub Pad. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After completely cleaning wood, apply Star brite Premium Teak Brightener to highlight wood grain and enhance natural wood color. To preserve and protect cleaned wood, apply Star brite Premium Golden Teak Oil or Tropical Teak Oil Sealer. NOTE: Immediately rinse spills and drips from surfaces not to be treated. Avoid contact with fabrics.

Features

 
Directions
For badly weathered, grey or black teak, apply Teak Cleaner & Brightener directly to dry wood. Use a stiff bristle cleaning brush or Star brite Medium Scrub Pad to spread product evenly. Allow Teak Cleaner & Brightener to remain on surface for approximately two to three minutes before scrubbing. Scrub in the direction of wood grain to ensure deep cleaning before thoroughly rinsing wood with fresh water. Severely dirty or stained wood may require a second application and use of Star brite Stainless Steel Teak Scrub pad. For lightly weathered teak, wet wood with fresh water, apply Teak Cleaner & Brightener, using a bristle brush or medium scrub pad to spread evenly over surface to be treated. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After cleaning wood, apply Star brite Premium Golden Teak Oil to enhance natural wood color and preserve and protect the restored wood. Rinse off spills and drips onto surfaces not being treated. Avoid contact with fabrics.

Features