Cutless Bearings – The Marine Place https://www.themarineplace.qa Choose the best Sun, 30 Apr 2023 15:50:02 +0000 en hourly 1 https://wordpress.org/?v=5.5.15 https://www.themarineplace.qa/wp-content/uploads/2020/01/cropped-logo-e1579592010611-1-32x32.png Cutless Bearings – The Marine Place https://www.themarineplace.qa 32 32 Earn Johnson Cutless Bearing 4 X 5 X 16” https://www.themarineplace.qa/product/earn-johnson-cutless-bearing-4-x-5-x-16/?utm_source=rss&utm_medium=rss&utm_campaign=earn-johnson-cutless-bearing-4-x-5-x-16 https://www.themarineplace.qa/product/earn-johnson-cutless-bearing-4-x-5-x-16/#respond Fri, 08 May 2020 16:53:24 +0000 https://www.themarineplace.qa/?post_type=product&p=11288 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/earn-johnson-cutless-bearing-4-x-5-x-16/feed/ 0 Dock Johnson Cutless Bearing 3-1/2 X 4-1/2 X 14″ https://www.themarineplace.qa/product/dock-johnson-cutless-bearing-3-1-2-x-4-1-2-x-14/?utm_source=rss&utm_medium=rss&utm_campaign=dock-johnson-cutless-bearing-3-1-2-x-4-1-2-x-14 https://www.themarineplace.qa/product/dock-johnson-cutless-bearing-3-1-2-x-4-1-2-x-14/#respond Fri, 08 May 2020 16:51:43 +0000 https://www.themarineplace.qa/?post_type=product&p=11286 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/dock-johnson-cutless-bearing-3-1-2-x-4-1-2-x-14/feed/ 0 Dare Johnson Cutless Bearing 3 X 4 X 12″ https://www.themarineplace.qa/product/dare-johnson-cutless-bearing-3-x-4-x-12/?utm_source=rss&utm_medium=rss&utm_campaign=dare-johnson-cutless-bearing-3-x-4-x-12 https://www.themarineplace.qa/product/dare-johnson-cutless-bearing-3-x-4-x-12/#respond Fri, 08 May 2020 16:49:41 +0000 https://www.themarineplace.qa/?post_type=product&p=11284 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/dare-johnson-cutless-bearing-3-x-4-x-12/feed/ 0 Dane Johnson Cutless Bearing 3 X 3-3/4 X 12″ https://www.themarineplace.qa/product/dane-johnson-cutless-bearing-3-x-3-3-4-x-12/?utm_source=rss&utm_medium=rss&utm_campaign=dane-johnson-cutless-bearing-3-x-3-3-4-x-12 https://www.themarineplace.qa/product/dane-johnson-cutless-bearing-3-x-3-3-4-x-12/#respond Fri, 08 May 2020 16:47:09 +0000 https://www.themarineplace.qa/?post_type=product&p=11282 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/dane-johnson-cutless-bearing-3-x-3-3-4-x-12/feed/ 0 Card Johnson Cutless Bearing 2-1/4 X 3 X 9″ https://www.themarineplace.qa/product/card-johnson-cutless-bearing-2-1-4-x-3-x-9/?utm_source=rss&utm_medium=rss&utm_campaign=card-johnson-cutless-bearing-2-1-4-x-3-x-9 https://www.themarineplace.qa/product/card-johnson-cutless-bearing-2-1-4-x-3-x-9/#respond Fri, 08 May 2020 16:46:53 +0000 https://www.themarineplace.qa/?post_type=product&p=11281 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/card-johnson-cutless-bearing-2-1-4-x-3-x-9/feed/ 0 Cube Johnson Cutless Bearing 2-3/4 X 3-1/2 X 11″ https://www.themarineplace.qa/product/cube-johnson-cutless-bearing-2-3-4-x-3-1-2-x-11/?utm_source=rss&utm_medium=rss&utm_campaign=cube-johnson-cutless-bearing-2-3-4-x-3-1-2-x-11 https://www.themarineplace.qa/product/cube-johnson-cutless-bearing-2-3-4-x-3-1-2-x-11/#respond Fri, 08 May 2020 16:42:12 +0000 https://www.themarineplace.qa/?post_type=product&p=11278 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/cube-johnson-cutless-bearing-2-3-4-x-3-1-2-x-11/feed/ 0 Cork Johnson Cutless Bearing 2-1/2 X 3-1/4 X 10″ https://www.themarineplace.qa/product/cork-johnson-cutless-bearing-2-1-2-x-3-1-4-x-10/?utm_source=rss&utm_medium=rss&utm_campaign=cork-johnson-cutless-bearing-2-1-2-x-3-1-4-x-10 https://www.themarineplace.qa/product/cork-johnson-cutless-bearing-2-1-2-x-3-1-4-x-10/#respond Fri, 08 May 2020 16:42:09 +0000 https://www.themarineplace.qa/?post_type=product&p=11277 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/cork-johnson-cutless-bearing-2-1-2-x-3-1-4-x-10/feed/ 0 Cook Johnson Cutless Bearing 2-3/8 X 3-3/8 X 9-1/2″ https://www.themarineplace.qa/product/cook-johnson-cutless-bearing-2-3-8-x-3-3-8-x-9-1-2/?utm_source=rss&utm_medium=rss&utm_campaign=cook-johnson-cutless-bearing-2-3-8-x-3-3-8-x-9-1-2 https://www.themarineplace.qa/product/cook-johnson-cutless-bearing-2-3-8-x-3-3-8-x-9-1-2/#respond Fri, 08 May 2020 16:39:32 +0000 https://www.themarineplace.qa/?post_type=product&p=11275 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/cook-johnson-cutless-bearing-2-3-8-x-3-3-8-x-9-1-2/feed/ 0 Camp Johnson Cutless Bearing 2 X 2-3/4 X 8″ https://www.themarineplace.qa/product/camp-johnson-cutless-bearing-2-x-2-3-4-x-8/?utm_source=rss&utm_medium=rss&utm_campaign=camp-johnson-cutless-bearing-2-x-2-3-4-x-8 https://www.themarineplace.qa/product/camp-johnson-cutless-bearing-2-x-2-3-4-x-8/#respond Fri, 08 May 2020 16:36:47 +0000 https://www.themarineplace.qa/?post_type=product&p=11273 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/camp-johnson-cutless-bearing-2-x-2-3-4-x-8/feed/ 0 Call Johnson Cutless Bearing 2 X 2-5/8 X 8″ https://www.themarineplace.qa/product/call-johnson-cutless-bearing-2-x-2-5-8-x-8/?utm_source=rss&utm_medium=rss&utm_campaign=call-johnson-cutless-bearing-2-x-2-5-8-x-8 https://www.themarineplace.qa/product/call-johnson-cutless-bearing-2-x-2-5-8-x-8/#respond Fri, 08 May 2020 16:03:46 +0000 https://www.themarineplace.qa/?post_type=product&p=11268 Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.

PRECAUTION:
When shrink fitting of the bearing is required, chilling must be achieved by gradual cooling to not more than minus 20˚F(-28˚C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or shocking the bearing while in the chilled state could cause the rubber to separate from the shell.

Approved Bearings: Johnson Cutless® Naval Brass Sleeve Bearings meet military specification MIL-DTL- 17901C (SH) Class II Full-Molded type and have full type approval from The American Bureau of Shipping.

]]> https://www.themarineplace.qa/product/call-johnson-cutless-bearing-2-x-2-5-8-x-8/feed/ 0