5 Ch. Class Dmarine System Amplifier, 900 W, 12V

JL Audio

QAR 0.00

5-Channel Class D Marine System Amplifier, 100 W x 4 + 500 W x 1

Thanks to its ability to act as a “one-box solution”, the MHD900/5 is ideal for installations where space is at a premium and sound quality is the paramount goal.

While extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system… with a very serious 900 watts of power!

Using our Single Cycle Control switching design and R.I.P.S technology, the MHD900/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

SKU: J002-GMHD900/5 Category:
brands

Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 Ω100 W RMS x 4
Main Channels @ 3 Ω75 W RMS x 4
Main Channels @ 2 Ω75 W RMS x 4
Main Channels @ 1.5 Ω75 W RMS x 4
Main Channels – Bridged @ 8 Ω200 W RMS x 2
Main Channels – Bridged @ 4 Ω150 W RMS x 2
Subwoofer Channel @ 4 Ω500 W RMS x 1
Subwoofer Channel @ 3 Ω500 W RMS x 1
Subwoofer Channel @ 2 Ω500 W RMS x 1
Subwoofer Channel @ 1.5 Ω500 W RMS x 1
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 Ω100 W RMS x 4
Main Channels @ 3 Ω75 W RMS x 4
Main Channels @ 2 Ω75 W RMS x 4
Main Channels @ 1.5 Ω75 W RMS x 4
Main Channels – Bridged @ 8 Ω200 W RMS x 2
Main Channels – Bridged @ 4 Ω150 W RMS x 2
Subwoofer Channel @ 4 Ω500 W RMS x 1
Subwoofer Channel @ 3 Ω500 W RMS x 1
Subwoofer Channel @ 2 Ω500 W RMS x 1
Subwoofer Channel @ 1.5 Ω500 W RMS x 1
General Specifications
Frequency Response (Main Channels)12 Hz – 28 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel)12 Hz – 10 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Main Channels)>108.5 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Main Channels)>88.2 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω>400 / 50 Hz
Damping Factor @ 2 Ω>200 / 50 Hz
THD+N @ Rated Power (Main Channels)<0.03% @ 4 Ω
THD+N @ Rated Power (Subwoofer Channel)<0.05% @ 4 Ω
Input Voltage Range @ RCA InputsSwitchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
Min.Copper Power / Ground Wire GaugeAccepts up to 4 AWG wire
Fuse Rating60 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s): Channels 1 & 2 (front)High-Pass only
Filter Slope(s): Channels 1 & 2 (front)12/24 dB/octave
Filter Frequency Range: Channels 1 & 2 (front)50 Hz – 500 Hz
Filter Mode(s): Channels 3 & 4 (rear)High-Pass only
Filter Slope(s): Channels 3 & 4 (rear)12/24 dB/octave
Filter Frequency Range: Channels 3 & 450 Hz – 500 Hz
Filter Mode(s): Subwoofer ChannelLow-Pass only
Filter Slope(s): Subwoofer Channel12/24 dB/octave
Filter Frequency Range: Subwoofer Channel50 Hz – 500 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat FunctionYes
Infrasonic Filter: Subwoofer Channel30 Hz, Defeatable
Remote Level ControlOptional (HD-RLC)
Remote Level ModesSub Ch. only
Channel Input Mode SwitchYes (2/4/6 ch.)
Pass-Through Preamp OutputNone
Source Channel Selection for PreOutsN/A
Physical Specifications
Height (H)1.93 in / 49 mm
Width (W)10.74 in / 273 mm
Depth (D)8.29 in / 211 mm
Net Weight6.85 lb / 3.11 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.