March Seawater Pump 230V, 1/8HP, 1 Phase, 5GPM

March

QAR 0.00

LC-3CP-MD Magnetic Drive Pump
March Pump’s industrial LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (8PSI). The LC-3CP-MD pump may be used submerged or not submerged.
Perfect for Applications Including
The most common application for the LC-3CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.
Great for Chemicals Including
The LC-3CP-MD has pumped Fresh Water and Salt Water. The LC-3CP-MD may have been modified to handle these chemicals.  This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water.  Please contact March Pump to review your application before using the LC-3CP-MD.
Summary Paragraph
March Pump’s industrial LC-3CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 8.5 gallons per minute at 4 feet, and its maximum head is 19 Feet (8PSI).  The LC-3CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Cupric Nickel, Ceramic, and Ceramic Magnet.  When submerged, Epoxy, Stainless Steel, Polysulfone, and the Cord are also in contact with the solution. The inlet connection is 3/4 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-3CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March LC-3CP-MD is suitable for your application, please contact March Pump.

SKU: B002-ILC-2CP-MD Category:
Unit60Hz50Hz
SystemUSMetricUSMetric
Max Flow8.5 GPM32.2 LPM8.2 GPM31 LPM
Max Head19 FT5.8 M14.1 FT4.3 M
Power0.05 HP0.037 KW0.05 HP0.037 KW
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4″FPT
Outlet: 1/2″MPT
Submersible: Yes
  • Wet End: Polypropylene (Front and Rear Housing, Impeller), Cupric Nickel (Cooling Tube), Buna N (O-Ring, Cooling Tube Seal), Ceramic (Shaft, Thrust Washer), Ceramic Magnet
  • Uses: Submersible or Open Air
  • When submerged, the following is also in contact with the solution: Epoxy, Stainless Steel, Polysulfone, Cord
  • Max Internal Pressure: 25 PSI / 1.7 bar
  • Max Liquid Temperature: 130 °F / 54 °C
  • Note: Product image may be different than actual product received.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.